TROWEL SHINE POLISHING SYSTEM

The fastest and most cost efficient way to polish industrial floors

Trowel Shine system is designed for polishing concrete with power trowels. It is incredibly efficient and cost effective, and ideal for use on large industrial projects

TROWEL SHINE MAIN BENEFITS

• - Trowel Shine can be adapted for use with any ride-on power trowel and offers incredibly high productivity rates - over 10,000 square feet per hour per step.
• - Trowel Shine transforms your power trowel into a planetary grinding and polishing machine, and you can achieve the desired concrete finish, from matte to glossy, times faster compared to traditional polishing.
• - The Trowel Shine tool holders feature rotating head technology and flexible foam for an even tool wear and perfect balance.
• - Minimal start-up cost for power trowel owners who want to add polishing to their services - no need to buy new specialized equipment, all you need is a set of Trowel Shine tool holders and diamond tools.
• - Quick and easy tool changes with top quality diamond pads with velcro backing

TROWEL SHINE TOOL HOLDERS

Our rotating head technology provides planetary action and the flexible foam allows for an even tool wear and good balance.

CHOOSE BETWEEN 10.63" (270mm) AND 14" (355mm) TOOL HOLDERS

TOOL HOLDERS Part Numbers: #P02-FP-10.63 and #P02-FP-14

Choose the size and number of Trowel Shine tool holders depending on your power trowel type, floating pans diameter and number of blades. It is recommended to match the number of tool holders to the number of the blades on your power trowel - on power trowel with 5 blades, it is best to install 5 tool holders.

TOOL HOLDER INSTALLATION

Make sure that the holders are spaced out evenly and do not stick out outside the pans. The tool holders come with installation templates and instructions to help you drill the holes correctly. We can also supply different diameter pans with pre-installed tool holders for your convenience.

POPULAR TROWEL SHINE SET-UPS

HOW IT WORKS

TROWEL SHINE DIAMOND TOOLING

Evaluate the floor before selecting the diamond tooling - consider the concrete hardness, condition of the concrete, desired finish, etc. We recommend WET application for the process steps below - this will minimize the dust in the air and prolong the life of the diamond tools. A proper slurry management method should be in place though.

During the first steps (200 grit and lower), our tools will work best when used wet with Consolideck First Cut. Consolideck First Cut lifts concrete slurry solids away from the surface, suspends them, and clears the path for the diamonds, which increases efficiency and reduces clean up time between steps.

THE WAFFEL STYLE DIAMOND PADS

offered in full grit range from 50 grit to 3500 grit

DAMAGED CONCRETE & RAIN DROP EFFECT

If grinding is neccessary, start with the SA-MB metal bond grinding discs - 3-inch pucks, with velcro-backing, offered in 46/70/120 grit.
Use 3 or 4 pcs on 10.63" holders and 5 pcs on 14" holders.

OPTIONAL POLISHING STEPS

For maximum shine, continue with 1800 & 3500 grit V-Harr premium polishing pads or ShinePro pads.
Apply a concrete sealer after 3500 grit, if needed, and burnish the floor with ShinePro BUFF pad.

INDUSTRIAL WAREHOUSE BEFORE & AFTER TROWEL SHINE